We are a Manufacturing Company of industrial Flow measuring equipments in India. Pride- HPOG series Positive Displacement Oval Gear Flowmeters are manufactured to provide high precision volumetric flow measurement of clean fuels, oils and lubricants, This Flowmeter is used in various industries such as automobile, transport, earth moving, mining and many industries. The oval wheel meter consists of a measuring chamber housing with two pivoted oval wheels, which are toothed and roll off in counter rotation around each other. As fluid passes through the meter, the oval wheel rotate proportionately to the number of rotations is equal to the volume measurement.

PRIDE -HPOG Series Positive Displacement oval gear flowmeters are manufactured to provide high precision volumetric flow measurement of clean fuels, Bio diesel, oil and Lubricants. The pickup sensor located at the top of the oval gears sense the rotation and gives the pulse output which can converted into digital output. #Digital & Analogue Diesel flowmeter #Oval gear flowmeter #Positive Displacement flowmeter #PD flowmeter #Positive displacement oval gear flowmeter #HSD flowmeter #Cast Iron Oval gear flowmeter #SS304 Oval gear flowmeter #SS316 Oval gear flowmeter

Pride Controls & Systems is pleased to offer the orifice plate flow meter is a crucial differential pressure flow meter used extensively for measuring clean liquid, gas, and steam mass flow. It is universally applicable for all pipe sizes and offers a highly cost-effective solution for assessing fluid flows in larger pipes (exceeding 6" diameter). Predominantly composed of stainless steel, the orifice plate is the most prevalent material employed. When it comes to low flow rate measurement, a d/p cell featuring an integral orifice is unequivocally the optimal choice. It is imperative to note that orifice plate flow meters are exclusively recommended for clean, single-phase fluids. Even minimal build-up can result in substantial measurement inaccuracies or unit blockage. During installation, critical factors, including tap location and condition, pipe state, adequacy of straight pipe runs, gasket interference, pipe, and orifice bore misalignment, and lead line design must be meticulously observed. Moreover, potential adverse circumstances such as the blunting of the sharp edge, corrosion or erosion-induced nicks, plate warpage stemming from water hammer and dirt, and the deposition of grease or secondary phases on the orifice surface necessitate unwavering attention.

Pride Controls & Systems Pvt Ltd are the Manufacturers, Suppliers and Exporters of Sanitary Turbine Flow meter is designed to provide high performance and good accuracy with various sizes and end connection. Optimised design to reduce the influence of flow profile. These clamp on type of connection is used for hygienic and cleaning process such as Food oil, Vinegar, Free Flowing Liquids, Diary & milk products etc.

Pride Controls & Systems Pvt. Ltd is an ISO 9001:2015 Certified Manufacturing Company of high Performance Industrial Grade Flow measuring Instruments. These Multijet Watermeters are available from DN 15 to DN 50 and the Optional features of Pluse Output/ Reed Switch. It has better accuracy of ± 2% at transitional Flow rate. The Tri-clover type of water meters are used for hygienic and cleaning purpose such as food & Beverage, Dairy and Milk etc. The Pride Class B Mechanical Stainless Steel analog Watermeters are Conforms to ISO-4064 Standard.

We are the manufacturer, Supplier and the Exporters of PRIDE HET-1000 Series Sanitary Turbine Flowmeter is designed to provide high Performance and good accuracy with Various Sizes and End Connections. This Tri- Clover standard is easy to fix and remove for the cleaning purpose and maintenance in result of lower risk of product contamination. It used to measure the flow rate and volume of Conductive and Non-Conductive Liquids, Mineral oil, Chemicals, Glycol, Vinegar, Wine, Solvents etc.

Pride Controls and Systems are the Manufacture, Supplier and Exporters of the Turbine Flowmeter Operates and Measures the media through a Rotor Which runs freely Within a tube. Pride HET-1000 Liquid Turbine flow meter with Flange End are used to measure dry gases and liquids such as hydrocarbons, chemicals, vapors, fuels and other types of liquids with lower viscosity for applications requiring highly accurate and precise measurements of flow rate and Free-Flowing and Medium Viscous Liquids. There are Many features available from:- Long Life and Reliability, High Accuracy & Repeatability, Power Supply Can be 24 V DC/ Battery Operated. Outputs of 4 – 20 mA, 0 - 20 mA, 2&3 -Wire, Pulse, RS 485.

Pride controls & system are the manufacture, Supplier and Exporters of Stainless Steel Multijet Tri-clover end water meter. we have SS 304, SS 316 material of construction. Tri-clamp fitting flow meter is mainly with stainless steel wet parts material also tri-clamp process connection for sanitary and hygienic purpose, in- line type flow sensor is widely used in food industry such as food and beverage industries etc. It will be easy to fix and remove in between the pipe line, which facilitate disassembly and cleaning to measure the flow rate.

Sanitary Electromagnetic flow meters. We are flowmeter manufacturers, suppliers and exporters from Chennai. The Pride electromagnetic flow meter is used in sanitary application in various industrial applications to measure the clean and conductive liquids in CIP and SIP applications. Sanitary applications flowmeter are manufactured mostly in SS316 and SS316L material of contstructions.