PRIDE -HPOG Series Positive Displacement oval gear flowmeters are manufactured to provide high precision volumetric flow measurement of clean fuels, Bio diesel, oil and Lubricants. The pickup sensor located at the top of the oval gears sense the rotation and gives the pulse output which can converted into digital output. #Digital & Analogue Diesel flowmeter #Oval gear flowmeter #Positive Displacement flowmeter #PD flowmeter #Positive displacement oval gear flowmeter #HSD flowmeter #Cast Iron Oval gear flowmeter #SS304 Oval gear flowmeter #SS316 Oval gear flowmeter

The Pride PLST68 Piezo level probe with transmitter is used measure the continous level of borewell ground water applications range upto 1000 meters. When the piezo level probe is immersed into a liquid through the channel, A liquid column emerges above the probe. The Liquid column increases as the probe is immersed deeper into the liquid and applies pressure on the piezo sensor by the force of its weight. The measured pressure is transmitted as a standard Signal. The signal is linearly proportional to the rising liquid. #Piezo Meter #Piezo level Sensor #Piezo Water level sensor #Piezo Sensor

PRIDE PRI-MAG 6000-T Electromagnetic BTU Meter is a high Performance device designed to monitor The usage and Performance of the liquid cooling and heating transferring applications such as Chillers, AHUs and Thermic Fluid heat transfer. The Combination of an Electromagnetic flowmeter With a pair of temperature sensors performs the action of BTU Measurement. Pride Pri-Mag 6000T BTU Meters Supports our user to monitor, measure almost all the required data involved in HVAC Parameters Such as Energy Consumption, Current flow, Total Flow, Inlet temperature, Outlet temperature, temperature difference in consumption, energy unit Consumed etc.. #Electromagnetic BTU Meter #Magnetic BTU Meter #DIgital Water flow BTU Meter #Water flowmeter with BTU Meter Connectivity

We manufacture supplier of multijet water meter in Hyderabad, Telangana, India. We Pride Controls is a manufacturing company certified ISO 9001 : 2015 for High Performance Industrial grade flow meters. The Pride Class B Multijet Mechanical CI analog water meters are conforms to ISO - 4064 standard and used in various applications such as Treated Effluent water and sewage water, raw water, waste water. We also supply these water meters to throughout India and also we do exports to various countries. PRIDE - MECHANICAL MULTIJET WATERMETERS • Conforms to international standards ISO 4064 • Available MOC – CAST IRON, BRASS, • Sizes available from DN15 to DN40 • German design ensures better accuracy • allows high flow rate with low pressure drop • Vacuum sealed register for smooth flow measurement • Anti-Frost dial display for clear readings • Removable Mechanism ensures trouble free maintenance FEATURES Magnetic driven water meter Sizes available from DN15 to DN50 Upto 50 Deg C for cold water meter and upto 130 Deg C for hot water meter Optional features of Pulse output / Reed switch Available in Screwed, Flanged and Tri-clover end connections Better accuracy of + 2% at transitional flow rate

PRIDE Liquid Turbine Flow Meter is designed to give good accuracy and high performance. The Turbine flowmeter is mainly used in the measurement of flow rate and volume of non-conductive and conductive liquids and medium viscous liquids. The optimized design helps to minimize the influence of flow profile and low pressure loss. This Turbine Flowmeter are manufactured in various sizes, connections, communication port, construction, output, etc. The Pride HET-1000 Liquid Turbine Flow Meter operates and measures the media through a Rotor which runs freely within a tube. When the fluid media flows through the cylindrical tube that applies a force on the rotor which causes the rotation and that rotation speed is proportional to the velocity of the fluid media. Every time the rotor makes the full complete rotation, a pulse generated in the transmitter which is corresponding to the volume of fluid media passing through the cylindrical tube of the turbine flow meter. Most used applications are Acids, Solvents, Diesel, Kerosene, Pure Water, De-Mineralized Water, Syrups, Mineral Oil, Food Oil, Spirits, Chemicals, Petrol, Ammonia Liquid, Wine, Vinegar, Alcohol, Free Flowing Liquids, Low & Medium Viscous Liquids, Conductive & Non-Conductive Liquids. The Pride HET-1000 Liquid Turbine flow meter can be installed both Horizontal and Vertical positions. We recommend only for Horizontal installation for larger sizes turbine flowmeter from DN100. In accordance to API 2534 standards, the straight pipe section of 10 D before the turbine flow meter and 5 D after is required. Also we recommend an air separator and strainer before the turbine flow meter to achieve it best performance. The standard calibration is done based on water with a density of 1kg/Liter and viscosity of 1mPass.

Pride Controls & Systems Pvt Ltd is an ISO 9001 : 2015 Certified Manufacturing company of High Performance Industrial grade flow measuring instruments. The Pride Class B Mechanical CI analog water meters are conforms to ISO - 4064 standard and used in various applications such as Effluent water, sewage water, Raw water, Waste water. We supply these water meters to PAN India and also exports to various countries. PRIDE - MECHANICAL WATERMETERS • Conforms to international standards ISO 4064 • Available MOC - SS304, SS316 • Sizes available from DN15 to DN600 • German design ensures better accuracy • allows high flow rate with low pressure drop • Vacuum sealed register for smooth flow measurement • Anti-Frost dial display for clear readings • Removable Mechanism ensures trouble free • maintenance FEATURES Magnetic driven water meter Sizes available from DN15 to DN50 Upto 50 Deg C for cold water meter and upto 130 Deg C for hot water meter Optional features of Pulse output / Reed switch Available in Screwed, Flanged and Tri-clover end connections Better accuracy of + 2% at transitional flow rate

Pride Controls & Systems Pvt Ltd is an ISO 9001 : 2015 Certified Manufacturing company of High Performance Industrial grade flow measuring instruments . The Pride PCMT-H Metal tube variable area flowmeter is to measure the flow rate of liquid, steam, gas and oil with greater flexibility & less pressure drop in various industrial applications. PRINCIPLE OF OPERATION OF VARIABLE AREA FLOW METER This Flowmeter works based on variable area principle. When the fluid flow increases, the float in a metal tube raises and the float’s height is directly proportional to the flow rate of the fluid..The higher the flow rate the higher the float is raised. The float moves in a tapered tube up or down in proportion to the flow rate of the fluid and the annular area between the float and the tube. Advantages of Metal tube Variable Area Flowmeter • Short mounting length and compact construction • Easy method of installation • No straight pipe run required before or after the flowmeter • Metallic tube with a robust construction • Indication by means of magnetic coupling • High performance even at extreme working conditions • High resistance to corrosion • Low pressure drop • Vertical or horizontal connections Features of Metal tube Variable Area Flowmeter • Installation: Vertical as standard and Horizontal Mounting can be done with optional feature • Display: LCD display for flow Tantalizer on request • Flow measurement: Suitable for Liquid, Steam, Gas, Air & Oil • Flow Units: LPH, M3/hr, Kg/hr, Nm3/hr • Line Sizes: 1/4th to 6” • Transmitter Output: 4 – 20 mA Analog output can be given as optional feature • Alarm Output: Relay Output • Pressure Rating: 40 Bar as standard and up to 200 Bar can be given on request • Temperature: 50 Deg C to +200 Deg C as standard and up to 400 Deg C on request • End Connections: Flanged, Threaded, Tri Clamp and others as per request • Body Material: SS304, SS316, SS316L, and other materials as per request • Wetted Parts: PTFE, SS316L, SS316, SS304, and other materials as per request.

Pride Controls is an ISO 9001: 2015 certified manufacturer of High Performance Industrial grade Vortex Flow Meters which is used to measure Conductive and Non- Conductive Liquids, Dry Gas, Wet Gas, Mixture of Gases, Saturated & Superheated Steam. These Vortex flow meters are designed to measure the mass flow & volumetric flow of the above fluid’s in various applications which are not stable in parameters like Conductivity, ph, Viscosity, Density, Specific Gravity, Pressure and temperature. Working Principle of Vortex Flowmeter A Vortex Flowmeter measures the fluid flow when an obstruction placed i a fluid’s stream, the vortices are shed alternately from the placed obstruction. This creates the pattern of flow which is known as Karman street effect discovered by Todor Von Karman. The shedding frequency of the fluid is proportional to the flow velocity. Features • Measures Mass flow, Volumetric Flow, Pressure, & Temperature • Suitable for Dry Gas, Wet Gas & Mixture of Gases • Super Heated& Saturated steam measurement • Measurement of Conductive & Non Conductive Liquids such as Water, Acid & Base • Anti Vibration design& long service life • Digital technology support Industry 4.0 • Pressure rating 16kg/cm2 is standard and up to 100kg/cm2 is optional feature • Temperature rating -40 Deg C to +350 Deg C on request as per the application • Outputs 4-20 mA, Pulse, HART & Modbus RS485 Advantages • Easy installation, Non Moving parts and maintenance free design • Factory calibration & Programming as per the process requirement enables plug & Play Installation • Wetted parts are SS304, SS316 and other materials as per media & applications • High Performance even at extreme industrial conditions • High resistance to corrosion, Pressure & Temperature • Low pressure drop • Maintenance free design About Pride Controls Pride Controls & Systems Pvt Ltd is an ISO 9001 : 2015 certified manufacturing company of industrial flow measuring equipment in India . We at Pride Controls manufactures flow meters such as Electromagnetic flowmeters, Vortex flowmeters, Thermal mass flow meters, Turbine flowmeters, Ultrasonic flowmeters, Variable area flowmeters and water meters.

PRIDE HET 1000 SERIES TURBINE FLOWMETER INTRODUCTION PRIDE HET-1000 series Liquid Turbine Flow Meter is designed to provide high performance and good accuracy. This Turbine flowmeter is one of the best choices for the measurement of flow rate and volume of conductive and non-conductive liquids, free-flowing and medium viscous liquids. Due to the optimized design it has minimized influence of flow profile and low pressure loss with long meter life and reliability. This Turbine Flowmeter comes with various sizes, end connections, material of construction, output, communication port, etc. PRINCIPLE OF OPERATION The Pride HET-1000 Liquid Turbine Flow Meter operates and measures the media through a Rotor which runs freely within a tube. When the fluid media flows through the cylindrical tube that applies a force on the rotor which causes the rotation and that rotation speed is proportional to the velocity of the fluid media. Every time the rotor makes the full complete rotation, a pulse generated in the transmitter which is corresponding to the volume of fluid media passing through the cylindrical tube of the turbine flow meter. APPLICATIONS Acids, Solvents, Diesel, Kerosene, Pure Water, De-Mineralized Water, Syrups, Mineral Oil, Food Oil, Spirits, Chemicals, Petrol, Ammonia Liquid, Wine, Vinegar, Alcohol, Free Flowing Liquids, Low & Medium Viscous Liquids, Conductive & Non-Conductive Liquids. INSTALLATION: The Pride HET-1000 Liquid Turbine flow meter can be installed both Horizontal and Vertical positions. We recommend only for Horizontal installation for larger sizes turbine flowmeter from DN100. In accordance to API 2534 standards, the straight pipe section of 10 D before the turbine flow meter and 5 D after is required. Also we recommend an air separator and strainer before the turbine flow meter to achieve it best performance. The standard calibration is done based on water with a density of 1kg/Liter and viscosity of 1mPass.

The Electromagnetic flowmeters are used in bore well to measure the water withdrawals, usage and consumption. These electromagnetic flow meters are manufactured to face all kinds of site challenges and to perform with good accuracy and reliability. The bore well raw water contains good electrical conductivity and the electromagnetic flowmeter works on Faraday’s law of electromagnetic induction formula to measure the water flow.

A COMMITMENT TO BETTER PERFORMANCE Pride Controls & Systems PVT LTD is an ISO 9001 : 2015 Certified Manufacturing company of High Performance Industrial grade flow measuring instruments. The Pri - Mag series of electro magnetic flow meters are manufactured in robust design to meet all kinds of industrial challenging atmosphere and performs with good accuracy and reliability. WORKING PRINCIPLE OF ELECTROMAGNETIC FLOWMETER Faraday’s law of electromagnetic induction formula is the working principle of this flow measuring equipment. This electromagnetic flow meter consist two numbers of inductive coils, electrodes and transmitter unit. The measurement is done when the conductive fluid passes through the pair of coils which the electromagnetic field created, and the voltage induced due to flux which is sensed by the electrodes and transmitted to the electronic circuits. ADVANTAGES OF PRI - MAG 6000 ELECTROMAGNETIC FLOWMETER *Accuracy will not affected due to change in viscosity, density, ph, temperature & pressure. *Minimum line size 10mm to maximum 3000mm. *No moving parts and it’s a full bore flow meter. *No wear and tear parts so that increased service life. *Fast response to intermediate flow changes. *Suitable for liquids with sludge, heavy particles and slurries. *Equipped with latest communication protocols to support industry 4.0 / Internet Of Things (IOT). *Suitable for highly corrosive and inflammable liquids, chemicals acids and bases with certain level of conductivity. *PRI - MAG comes with both Metal and Non-Metal body Various power options like AC, DC, Battery Powered and Solar Powered. *Communication protocols includes HART, GSM, GPRS, RS 485, RS 232 MODBUS RTU *Electrodes in Hastelloy C, Titanium, Tantalum, Platinum can be given as per the fluids parameters.

Central Ground Water Authority (CGWA) has issued public notice to all the project proponents/users drawing ground water and seeking/having NOC shall have to mandatorily install tamper-proof digital water flowmeters with telemetry on all the ground water abstraction structures within their premises.